Preparing The Battery - NEC KPN User Manual

Be careful not to damage electric parts of the SIM card holder when inserting a SIM card.
Do not apply extreme stress to the rear cover. Damage may occur to the rear cover, LCD, or keypads of the phone.
Removing a SIM card
1 Press the SIM card gently in the direction shown as the arrow.
2 While pressing the SIM card, slide the SIM card in the direction shown by the arrow.
3 Remove the SIM card.
The phone supports a number of languages and the keyboard symbols have been chosen for world-wide operation.
If the SIM card is already inserted, see "Powering on the phone" on page 20.

Preparing the battery

Charging the battery for the first time
Your phone is powered by a rechargeable battery. A new phone battery must be fully charged before using your
phone for the first time.
• Before attempting to use your phone, insert the phone's battery. Place the battery metallic end towards
phone's metallic part. Lower the battery towards the phone to lock into place and slide back the rear cover until
you hear a click.
• Connect the NEC battery charger supplied with your phone to a suitable main power socket.
• Connect the charger plug into the connector at the base of the phone.
• Check that the battery icon becomes animated on the LCD. Leave the phone charging until the battery icon
stops moving to ensure that the battery is fully charged.
DO NOT connect a charger or any other external DC source if the phone's battery is not inserted.
18
Charger connector