Mld Snooping Examples - SMC Networks ES4704BD Manual

Mld snooping vlan 1 mrouter port
Note:"!"-static mrouter port
!Ethernet1/2
Displayed information
Mld snooping L2
querier
Mld snooping query-interval
Mld snooping max reponse
time
Mld snooping robustness
Mld snooping mrouter
keep-alive time
Mld
query-suppression time
MLD Snooping Connect Group
Membership
Mld snooping vlan 1 mrouter
port
18.4.3.14 show mac-address-table multicast
Command: show mac-address-table multicast [vlan <vlan-id>]
Function: Display the information of multicast MAC address table
Parameter: <vlan-id> ,the VLAN ID included in the entries to be displayed.
Command Mode: Admin Mode
Default: Mapping between the multicast MAC address and port is not displayed by
system default.
Usage Guide: This command shows the information on multicast address table of
current switch.
Example: Show the multicast mapping in vlan 100
Switch #show mac-address-table multicast vlan 100
Vlan Mac Address
---- --------------------------- ------- -------------------------------------
100 01-00-5e-01-01-01

18.4.4 MLD Snooping Examples

Scenario 1: MLD Snooping Function
Explanation
general whether or not l2-general-querier is enabled on vlan,
the querier display status is set to could-query or
suppressed
Query interval time of the vlan
Max response time of this vlan
Robustness configured on the vlan
port Keep-alive time of the dynamic mrouter on this vlan
snooping timeout of the vlan as l2-general-querier at suppressed
status.
Group
correspondence between the port and （S,G）.
Mrouter port of the vlan, including both static and
dynamic.
Type
MULTI Ethernet
membership of the
Ports
742
vlan, namely the