SMC Networks ES4704BD Manual page 805

20.3.1.1.1 debug aaa
Command: debug aaa
no debug aaa
Function: Enables AAA debugging information; the " no debug aaa" command disables
the AAA debugging information.
Command mode: Admin Mode
Parameters: N/A.
Usage Guide:Enable AAA debugging information allows the check of RADIUS
negotiation process and is helpful in troubleshooting.
Example:Enable AAA debugging information.
Switch#debug aaa
20.3.1.1.2 debug dot1x
Command:debug dot1x
no debug dot1x
Function: Enables dot1x debugging information; the " no debug dot1x" command
disables the dot1x debugging information.
Command mode: Admin Mode
Parameters: N/A.
Usage Guide: Enable dot1x debug information allows the check of dot1x protocol
negotiation process and is helpful in troubleshooting.
Example: Enable dot1x debugging information.
Switch #debug dot1x
20.3.1.1.3 show aaa authenticated-user
Command: show aaa authenticated-user
Function: Displays the authenticated users online.
Command mode: Admin Mode
Usage Guide: Usually the administrator is concerned only with the online user
information, the other information displayed is used for troubleshooting by technical
support.
Example:
Switch#show aaa authenticated-user
------------------------- authenticated users -------------------------------
UserName Retry RadID Port EapID ChapID OnTime
-----------------------------------------------------------------------------
--------------- total: 0 ---------------
20.3.1.1.4 show aaa authenticating-user
Command: show aaa authenticating-user
UserIP
805
MAC