Commands For Mrpp; Clear Mrpp Statistics; Control-Vlan - SMC Networks ES4704BD Manual

Fail-timer <INT>
No fail-timer
Enable
No enable
3) Display and debug MRPP relevant information
Command
Admin Mode
debug MRPP
no debug MRPP
Show MRPP {<INT>|}
Show MRPP statistics {<INT>|}
clear MRPP statistics {<INT>|}

22.3 Commands For MRPP

22.3.1 clear mrpp statistics

Command :clear mrpp statistics {<INT>|}
Function：Clear statistic information of MRPP data package of MRPP ring receiving and
transferring.
Parameter： <INT> is MRPP ring Id, the valid range is from 1 to 4096, if not specified ID,
it clears all of MRPP ring statistic information.
Command Mode： Admin Mode
Default：
Usage Guide：
Example： Clear statistic information of MRPP ring 4000 of switch.
Switch#clear mrpp statistics 4000

22.3.2 control-vlan

Configure Hello packet overtime timer
sending from primary node of MRPP
ring, format "no" restores default timer
value
Enable MRPP ring, format "no" disables
enabled MRPP ring
Explanation
Disable MRPP
information, format "no" disable MRPP
debug information output
Display MRPP
information
Display receiving data package statistic
information of MRPP ring
Clear receiving data package statistic
information of MRPP ring
833
module debug
ring configuration