Net Link States (Area 0.0.0.2)
Link ID
ADV Router
20.1.1.2
192.168.1.2
Summary Link States (Area 0.0.0.2)
Link ID
ADV Router
6.1.0.0
192.168.1.2
6.1.1.0
192.168.1.2
22.1.1.0
192.168.1.2
ASBR-Summary Link States (Area 0.0.0.2)
Link ID
ADV Router
192.168.1.1
192.168.1.2
AS External Link States
Link ID
ADV Router
2.2.2.0
192.168.1.1
2.2.3.0
192.168.1.1
14.6.5.1.11 show ip ospf interface
Command: show ip ospf interface <interface>
Function: Display the OSPF interface messages
Parameter: <interface> is the name of interface
Default: Not displayed
Command Mode: All modes
Example:
Switch#show ip ospf interface
Loopback is up, line protocol is up
OSPF not enabled on this interface
Vlan1 is up, line protocol is up
Internet Address 10.10.10.50/24, Area 0.0.0.0
Router ID 10.10.11.50, Network Type BROADCAST, Cost: 10
Transmit Delay is 5 sec, State Waiting, Priority 1
No designated router on this network
No backup designated router on this network
Timer intervals configured, Hello 35, Dead 35, Wait 35, Retransmit 5
Hello due in 00:00:16
Neighbor Count is 0, Adjacent neighbor count is 0
14.6.5.1.12 show ip ospf neighbor
Command: show ip ospf [<process-id>] neighbor [{<neighbor_id> |all |detail [all]
|interface<ifaddress>}]
Function: Display the OSPF adjacent point messages
Parameter: <process-id> is the process ID ranging between 0~65535
<neighbor_id> is the dotted decimal notation neighbor ID
all: Display messages of all neighbors
detail: Display detailed messages of all neighbors
Age Seq#
CkSum
254 0x8000002b 0xece4
Age Seq#
CkSum Route
68 0x8000002b 0x5757 6.1.0.0/22
879 0x8000002a 0xf8bc 6.1.1.0/24
308 0x8000000c 0xc8f0 22.1.1.0/24
Age Seq#
CkSum
1702 0x8000002a 0x89c7
Age Seq#
CkSum Route
1499 0x80000056 0x3a63 E2 2.2.2.0/24 [0x0]
1103 0x8000002b 0x0ec3 E2 2.2.3.0/24 [0x0]
493