SMC Networks ES4704BD Manual page 552

no distance <1-255> <ip-address/M> [<WORD>]
Function: Set the manage distance of the routing prefix. The "no distance <1-255>
<ip-address/M> [<WORD>]" command restores to the default value
Parameter: <1-255>: Manage distance
<ip-address/M>: Routing prefix
<WORD>: Access-list name
Default: Not set
Command Mode: BGP routing mode
Usage Guide: Set the manage distance for specified BGP route as the path selecting
basis
Example: Switch(config-router)# distance 90 10.1.1.64/32
14.8.3.32 distance bgp
Command: distance bgp <1-255> <1-255> <1-255>
no distance bgp [<1-255> <1-255> <1-255>]
Function: Set the BGP protocol manage distance. The "no distance bgp [<1-255>
<1-255> <1-255>]" command restores the manage distance to default value
Parameter: Respectively the EBGP, IBGP and LOCAL manage distance of the BGP
Default: Default EBGP is 20, others are 200
Command Mode: BGP routing mode.
Usage Guide: Set the manage distance for BGP routing as the NSM path selecting basis
Example: Switch(config-router)# distance bgp 15 150 150
14.8.3.33 exit-address-family
Command: exit-address-family
Function: Exit the BGP address-family mode
Parameter: None
Default: None
Command Mode: BGP address-family mode
Usage Guide: Use this command to exit the mode so to end the address-family
configuration when configuring address-family under BGP
Example:
Switch(config)#router bgp 100
Switch(config-router)#address-family ipv4 unicast
Switch(config-router-af)# exit-address-family
Switch(config-router)#
14.8.3.34 import map
552