SMC Networks ES4704BD Manual page 533

neighbor <ip-address> route-reflector-client
no neighbor <ip-address> route-reflector-client
（2） If there are more than one route reflectors in the cluster, the following
commands can configure cluster-id
Command
BGP configuration mode
bgp cluster-id <cluster-id>
no bgp cluster-id
（3） If the route reflector from clients to clients is needed, the following
commands can be used.
Command
BGP configuration mode
bgp client-to-client reflection
no bgp client-to-client reflection
t
6．Configure Peer Groups
（1） Create peer groups
Command
BGP configuration mode
neighbor <TAG> peer-group
no neighbor <TAG> peer-group
（2） Add neighbors to peers groups
Command
BGP configuration mode
Configure the current switch as
route reflector and specify a
client.
<ip-address>
route-reflector-client
command format deletes a
client.
Explanation
Configure cluster id; format "no" of the no
bgp cluster-id command cancels the
cluster id configuration.
Explanation
Configure the allowance of the route
reflector from clients to clients; the no bgp
client-to-client reflection command forbids
this allowance.
Explanation
Create peer
neighbor
command deletes peer groups.
Explanation
533
the
no neighbor
groups; the
no
<TAG> peer-group