SMC Networks ES4704BD Manual page 255

00 1-29, 31-39, 41-4094
03 30
04 40
8.5.1.3 show mst-pending
Command: show mst-pending
Function: In the MSTP region mode, display the configuration of the current MSTP
region.
Command mode: MSTP Region Mode
Usage Guide: In the MSTP region mode, display the configuration of the current MSTP
region such as MSTP name, revision, VLAN and instance mapping.
Note: Before quitting the MSTP region mode, the displayed parameters may not be
effective.
Example: Display the configuration of the current MSTP region.
Switch(Config)#spanning-tree mst configuration
Switch(Config-Mstp-Region)#show mst-pending
Name switch
Revision 0
Instance Vlans Mapped
----------------------------------
00 1-29, 31-39, 41-4093
03 30
04 40
05 4094
----------------------------------
Switch(Config-Mstp-Region)#
8.5.1.4 debug spanning-tree
Command: debug spanning-tree
no debug spanning-tree
Function: Enable the MSTP debugging information; The command "no debug
spanning-tree" disables the MSTP debugging information
Command mode: Admin Mode
Usage Guide: This command is the general switch for all the MSTP debugging. Users
should enable the detailed debugging information, then they can use this command to
display the relevant debugging information. In general, this command is used by skilled
technicians.
Example: Enable to receive the debugging information of BPDU messages on the port
255