Poly Studio X72 System User Manual page 19

Using Device Mode
Connect a computer to the Poly Studio X72 system USB-C and HDMI input ports to use the Poly Studio
X72 connected peripherals from your computer.
For more information on using Device Mode on your Poly Studio X72 system, see the Poly Video Mode
Administrator Guide and the Poly Partner Mode Administrator Guide at https://www.docs.poly.com.
Registering the System with Poly Lens
Poly Lens provides cloud-based management and insights for your system.
You can register your system with Poly Lens during system setup or on the Poly Lens registration page.
For more information, see
Factory Restore the System
A factory restore completely erases the system's flash memory and restores it to a stable software
version.
See the Poly VideoOS Release Notes, Version History section, for the current factory restore version.
The system doesn't save the following data with a factory restore:
• •
Current software version
• •
Logs
• •
User-installed PKI certificates
• •
Local directory entries
• •
Call detail record (CDR)
Procedure
1 Disconnect the power supply to turn off the system.
2 On the bottom of the Poly Studio X72 , insert a straightened paper clip through the factory
restore pinhole.
3 While continuing to hold the restore button, reconnect the power supply to turn the system on.
4 When the system LED indicator light turns amber, stop pressing the restore button.
Printed from Poly (http://docs.poly.com)
Poly Lens Help.
Page 19