Poly Studio X72 System User Manual page 15

Hardware installation
Mount your Poly Studio X72 system and connect peripherals such as a monitor, camera, microphone,
and speaker.
To ensure full functionality, the Poly Studio X72 system requires that you connect the following
peripherals:
• •
Monitor
• •
Controller
Your peripherals and configuration depend on the room size and room type.
For a list of supported peripherals, see the Poly VideoOS Release Notes.
For more information on connecting components and configuring the Poly Studio X72 system, see the
Poly Video Mode Administrator Guide and the Poly Partner Mode Administrator Guide at
www.docs.poly.com.
•
Mounting your Poly Studio X72 system
You can mount the Poly Studio X72 system using a monitor mount, wall mount, or VESA mount.
Mounting your Poly Studio X72 system
You can mount the Poly Studio X72 system using a monitor mount, wall mount, or VESA mount.
For information on mounting your Poly Studio X72 system, see the Poly Studio X72 Quick Start Guide.
Setting up the Poly Studio X72 system
After connecting the peripherals, you can power on and set up your system.
You can set up the system using one of the following methods:
• •
Using the out of box setup on a Poly TC10 or Poly TC8 touch controller
The Poly TC10 or Poly TC8 must be on version 6.0 or later and connected to the same subnet as
the Poly Studio X72 system.
• •
Accessing the system web interface
• •
Onboarding the system to Lens Cloud
•
Complete the out of box setup and choose a provider
After connecting peripherals, power on Poly Studio X72 system and complete the out of box set
up on a connected Poly TC10
Printed from Poly (http://docs.poly.com)
https://
Page 15