Poly Studio X72 System User Manual page 13

Your Poly Studio X72 system, supports multiple audio and video peripherals including:
• •
3.5 mm audio input and output
• •
USB-connected audio DSPs
• •
USB cameras
• •
Monitors using the HDMI 1 and HDMI 2 ports
• •
Content import using the HDMI in port
Use the following topics for connecting peripherals to your system.
Your peripherals and configuration depend on the room size and room type.
•
Connect a USB camera to the Poly Studio X72 system
Connect a supported or compatible USB camera to your Poly Studio X72 system.
•
Connect monitors to the Poly Studio X72 system
Connect two monitors to the system to display far-side video and content.
•
Connect a USB audio DSP to your Poly Studio X72 system
Connect a supported audio DSP to your system to handle audio input and output.
•
Connect a 3.5mm audio output device to the Poly Poly Studio X72 system
Connect an audio output device such as an amplifier or sound bar to your system using the
3.5mm audio output port.
Connect a USB camera to the Poly Studio X72 system
Connect a supported or compatible USB camera to your Poly Studio X72 system.
Note
Poly recommends powering off the system before connecting or disconnecting USB
cameras.
Note
If you connect a third-party camera to the system, camera controls may be limited or
unavailable. Poly DirectorAI features such as camera tracking and DirectorAI Perimeter
aren't available.
Procedure
•
Using the USB cable that shipped with your camera, connect the camera to an available USB-A
port on the Poly Studio X72 system.
When the Poly Studio X72 system starts, the camera displays in the system web interface under
General Settings > Device Management under Connected Devices.
Printed from Poly (http://docs.poly.com) Page 13