Poly Studio X72 System User Manual page 18

Access the System Web Interface
Access the system web interface to perform administrative tasks.
The system web interface enables you to do the following actions:
Note
If not prompted to do so during setup, Poly recommends changing the administrator
password in the system web interface.
• •
Finish setting up your system.
• •
Remotely configure and manage your system. Unlike the local interface, you can configure every
setting through the system web interface. Local interface is intended only for the initial setup.
• •
Control certain user functions of the system, such as placing calls and ending content sessions.
• •
Manage contacts.
Procedure
1 Open a web browser and enter the system IP address.
When setting up your system, the onscreen instructions display the IP address to use.
2 Enter the username (the default is admin).
3 Enter the password (the default is the last six characters of your system's serial number).
The user name and password are case sensitive.
Navigating the Poly Studio X72 system interface
The conferencing provider that you choose determines the options for navigating the system.
After setting up your system, you can navigate the system using one of the following controllers:
In Poly Video mode and Poly Device Mode
• •
Poly TC10 or Poly TC8 touch controller
• •
Poly Bluetooth remote control
• •
Poly IR remote control
In Teams Rooms mode, Zoom Rooms, mode, Google Meet mode, and other provider modes:
• •
Poly TC10 or Poly TC8 touch controller
• •
Poly Bluetooth remote control
• •
Poly IR remote control
Printed from Poly (http://docs.poly.com) Page 18