Immergas Magis Combo 12 Plus V2 I Instructions And Recommendations page 71

At the end of its service life, the appliance must not be disposed of like normal household waste
nor abandoned in the environment, but must be removed by a professionally authorised com-
pany as required by current legislation.
Contact the manufacturer for disposal instructions.
2.2 CLEANING AND MAINTENANCE
To preserve the system's integrity and keep the safety features, performance and reliability, which distinguish the assembly,
unchanged over time, you must execute maintenance operations on a yearly basis in compliance with what is stated in the rela-
tive point at "annual check and maintenance of the appliance", in compliance with national, regional, or local standards in
force.
2.3 CONTROL PANEL
Key (Fig. 59):
1 - Operating mode (winter - air conditioning - summer -
stand-by - off) and parameter confirm button
2 - Menu selection button
3 - Reset and exit menu button
4 - Domestic hot water temperature selection buttons
5 - Heating system temperature selection buttons
6 - Indoor unit pressure gauge
7 - Remote control connection (optional)
8 - Outdoor unit in operation
9 - Heat generator ignition
10 - Dispensed output level
11 - Operation with external temperature probe active (option-
al)
12
13
14
15
16
17
18
19
20
21
22
23
ST.008706/000
Magis Combo 12/14/16 Plus V2 I
- Connection to other Immergas units
- Central heating room mode function active
- Temperature indicator, indoor unit info and error codes
- Room cooling mode operation active
- Operation in cooling mode
- Operation in winter mode
- Operation in summer mode
- Stand-by Mode
- Not used on this model
- Blocked indoor unit, it needs to be unblocked by pressing the
"RESET" button
- Operation in dehumidification mode
- DHW production phase operating mode active
59
71