Immergas Magis Combo 12 Plus V2 I Instructions And Recommendations page 105

Schema elettrico con modalità puffer attiva
All relays can be configured as active puffer mode, the diagram shows the connection on relay 2. In the event this relay is used, it is neces-
sary to jumper pins 57 and 58 of connector X25 positioned on the relay board.
Active puffer mode excludes activation of the third zone mode.
3
Key (Fig. 72):
1 - Appliance
2 - Puffer
3 - 230 Vacv auxiliaries
A3 - Integrated P.C.B.
A7 - Three-relay board
B13 - Central heating probe
M10 - Puffer circulator
M10-1 - Zone 1 circulator pump
K1 - Configurable relay
K2 - Configurable relay
K3 - Configurable relay
The diagram (Fig. 72) represents the connection on relay K2.
For more details, see Parag. 3.18.
ST.008706/000
Magis Combo 12/14/16 Plus V2 I
2
1
72
105