Current Setting; Output On/Off; Switch The Actual/Setting Value Display; Cc/Cv Mode - ITech IT6800AB User Manual

rated value. Press
the voltage:
Solution1: press
cursor's position--------press
setting value.
Solution2: press
cursor's position------adjust the knob to increase or decrease the setting value.
Solution3: press
value. Then press

3.4 Current setting

IT6800A/B series power supply enables customer to set current from 0V to
rated value. Press
the voltage:
Solution1: press
cursor's position--------press
setting value.
Solution2: press
cursor's position------adjust the knob to increase or decrease the setting value.
Solution3: press
value. Then press

3.5 Output on/off

On/Off
button is lit, it represents output has been turned on. If
it indicates that output is off. In output on mode, the indicator light CV or CC will
be lit.
Note: Please ensure the power supply and DUT has been connected well and
then press

3.6 switch the actual/setting value display

Meter Meter
When
Meanwhile, VFD will appear a marker of "meter". When
it shows setting voltage and current on front panel.

3.7 CC/CV mode

According the ohm's law, output current is determined by output voltage and
the resistance of load. When actual current is less than the setting value, power
supply will function in CV mode. And CV status indicator lamp will be lit.
If actual current is above the setting value or rated value, power supply will
change to CC mode, and CC status indicator lamp will be lit.
V-set V-set
button, it will be lit. Now, there are three ways to set
V-set V-set
button-------press
V-set V-set
button------press
V-set V-set
button+ number
Enter
button to confirm.
I-set I-set
button, it will be lit. Now, there are three ways to set
I-set I-set
button-------press
I-set I-set
button------press
I-set I-set
button+ number
Enter
button to confirm.
button is used to control the output of power supply. When
On/Off
button to turn on the output.
button is used to switch the display between actual and setting value.
Meter Meter
button is lit, it shows actual voltage and current on front panel.
Copyright © Itech Electronic Co., Ltd.
www.tehencom.com
and button to increase or decrease the
0
to
and button to increase or decrease the
0
to
Functions and Characteristics
button to adjust the
button to adjust the
9
to set the voltage
button to adjust the
button to adjust the
9
to set the voltage
On/Off
On/Off
button is dark,
Meter Meter
button is dark,
15