ITech IT6800AB User Manual page 26

LIST
LIST
SET
STATE
LIST
LOAD
LIST EDIT
EXIT
POWER
MODEL
INFO
VER
SN-1
SN-2
SN-3
EXIT
EXIT
Quit menu
MENU
IT6800B series
MAX
Set the Maximum Voltage
VOLT
OCP
OFF
SET
ON
SYST
SET
P-MEN
(RESET)
P-OUT
(OFF)
OFF
Disable list function
ON
Enable list function
Recall list operation file (FILE0-FILE3)
SEC
TIME
(SEC)
MIN
VSET
Set step voltage
ISET
Set step current
SEC
Set step delay time (0.1-9999.9)
YES
NEXT
(YES)
NO
REPET 1-65535
NO
SAVE
FILE0-FILE3
Quit list menu
Model information
Firmware version
First six number of SN
Middle six number of SN
Last six number of SN
Quit information menu
Disable OCP function.
Enable OCP function ON(0～7.0000A)
Return to the factory default setup value
Reset
"Remembers" and restores the operating
parameters of power supply (voltage,
current settings...) before power was
Keep
turned off. The next time you power up the
unit, the parameters will be recalled
automatically.
OFF Set the Power to OFF state after power up.
"Remembers" and restores the power
ON/OFF state of power supply before
Keep
power was turned off. The next time you
power up the unit, the on/off state will be
Copyright © Itech Electronic Co., Ltd.
www.tehencom.com
Functions and Characteristics
Select second as time unit
Select minute as time unit
Continue to edit the next step
finish list file edit
Set repeat count
Do not save the current list file. In
this mode, the file can only run
for one time. Once you quit the
list mode or turn off the unit, the
file cannot be recalled.
save list file to assigned memory
location
18