Teldat M10-Smart Installation Manual page 28

4 Compliance
This product is supplied with antennas in order to fulfill local regulations. Do not choose other antennas. To comply
with power limits and RF exposure requirements, the antennas used for this transmitter must be installed in such a
way that they are always separated from nearby persons by a minimum distance of at least 25 cm.
4.11 Operating frequency
To find out more about operating frequencies and the maximum power transmitted in the frequency bands in which
the radio equipment operates, see appendix
4.12 Intended use of the equipment
The M10-Smart can be deployed as a Customer Premises Equipment (CPE) in enterprise branch offices or in envir-
onments managed by the service provider.
This product must only be used indoors.
22
RF WAN specifications on page 31 andWI-FI specifications on page 31.
Teldat S.A.
M10-Smart