Advertisement
Teldat S.A.
E
F
G
H
I
J
In addition to the foregoing, the rear panel also has LEDs linked to the LAN and WAN Ethernet interfaces.
3.1.2.1 LEDs
The following figure shows the router's Ethernet LAN LED indicators:
M10-Smart
-
WAN SFP interface
on page 27
Eth WAN-2 Base-T. WAN Gigabit Ethernet.
For more information on the WAN interface, refer to:
-
WAN connections
on page 13
-
WAN Base-T connectors
on page 25
-
WAN Base-T interface
on page 27
4-port Gigabit LAN Ethernet (LAN1 to LAN4).
For more information on the LAN interface, refer to:
-
4-port Ethernet LAN connections
-
LAN connectors
on page 25
-
LAN interface
on page 27
CONSOLE. Provides access to the M10-Smart local console for configuration and
monitoring purposes.
-
Connecting for configuration
-
Configuration connector
on page 26
-
Configuration interface
on page 30
USB 3.0 Ports.
For more information on the USB 3.0 connector, refer to:
-
Plug-in modules
on page 11
- on page
-
USB 3.0 interface
on page 30
RESET. Reset button. For further information on how the reset button works,
please see
RST button
on page 12.
Cell connectors (Main and Aux 1). Depend on model.
For more information on the Cellular interface, refer to:
-
WWAN antenna connection (cell connector)
-
WWAN connector
on page 25
-
Wireless WAN interface
on page 28
on page 13
on page 16
on page 14
3 Components and Power Supply
7
Advertisement
Need help?
Do you have a question about the M10-Smart and is the answer not in the manual?