Table of Contents
Advertisement
50 4T 100 4T
1
2
CHANGING THE REAR DIRECTION
INDICATOR BULBS
Carefully read page 64 (BULBS).
u
Place the vehicle on the stand.
u
Unscrew and remove the
504T
1004T
two screws (1).
u
Unscrew and remove the screw
50 2T
50 2T
(1).
NOTE
While removing the protection
screen, proceed carefully in order not to
break the cog.
Remove the protection screen (2).
u
NOTE
Make sure that the protection
screen locates correctly into its seat on
refitting.
66
use and maintenance Scarabeo 50 2T - Scarabeo 50 4T - Scarabeo 100 4T
50 4T 100 4T
5
4
1
u
Press slightly the amber lens
504T
1004T
(3), turn it anticlockwise and remove it.
NOTE
504T
1004T
amber lens (3), proceed carefully in order
not to break the cog.
u
Press the bulb (4) slightly and rotate it
anticlockwise.
u
Extract the bulb (4) from its seat.
NOTE
Insert the bulb into the bulb
holder, so that the two pins slide into the
slots in the holder.
u
Fit a new bulb of equal rating.
50 2T
3
NOTE
refit it into its seat so that the slotted
opening of the holder matches the hole for
While removing the
the screw.
2
1
5
If the bulb holder (5) comes off,
Advertisement
Table of Contents
