Table of Contents
Advertisement
50 4T 100 4T
NOTE
When you use the spare fuse (3),
remember to add a new spare fuse into the
proper seat.
u
Refit the inspection cover, see page 53
(REMOVING FRONT INSPECTION
COVER).
ARRANGEMENT OF THE FUSES
15A fuse (1) - From battery to:
starter
7.5A fuse - From battery to:
all electric loads excluded light circuit
powered by alternate current.
3
1
VERTICAL ADJUSTMENT OF THE
HEADLIGHT BEAM
NOTE
Beam inspection procedures may
vary from country to country. Observe the
law in force in the country of the user.
To adjust the headlight beam:
u
Place the vehicle on the centre stand on
firm and level ground.
Turn the appropriate screw (1) with a
u
screwdriver.
TIGHTEN (clockwise) to raise the beam;
SLACKEN (anticlockwise) to lower the
beam.
use and maintenance Scarabeo 50 2T - Scarabeo 50 4T - Scarabeo 100 4T
1
63
Advertisement
Table of Contents
