Table of Contents
Advertisement
NetAtlas Enterprise Ethernet Switch Manager User's Guide
3.7 Common EMS Command Buttons
The following table shows common command buttons found on most EMS screens.
Table 13 Common EMS Command Buttons
LABEL
DESCRIPTION
Apply
Click Apply to save the changes back to the switch.
OK
Click OK to save your changes and close the screen.
Cancel
Click Cancel to discard all changes and close the screen.
Close
Click Close to close the screen.
3.8 View the Switch
To display the selected switch, double-click the appropriate switch in the Device List Panel or
on the switch icon in the Device Panel. You can only display one switch in the device Panel
window at a time. Refer to the appropriate chapters or sections for the descriptions of each
menu screen.
Figure 12 Switch View
3.9 Switch Information
Follow the steps to display information on a switch.
1 Right-click on the switch icon in the Device List Panel.
2 Click Configuration > System > System Info. The switch information window displays
as shown next.
3 Choose a switch from the list located on the left-hand side of the screen.
41
Chapter 3 EMS Main Window
Advertisement
Table of Contents
