C
H A P T E R
6.1 VPN Site-to-Site
This chapter discusses how you can check the reports to look at the top sources
and destinations of traffic in VPN tunnels. Site-to-site refers to static VPN tunnels
between two IPSec devices. Each end must be identified by an IP address, domain
name or dynamic domain name. More detailed site-to-site VPN analysis is also
available for devices using the ZLD firmware platform (like the ZyWALL 1050).
Note: To look at VPN usage reports, each ZyXEL device must record forwarded
IPSec VPN traffic in its log. See the User's Guide for each ZyXEL device for
more information. In most devices, go to Logs > Log Settings, and make sure
IPSec is enabled.
6.1.1 VPN Link Status
Use this report to see which of the device's VPN tunnels are connected.
Vantage Report User's Guide
6
VPN
167