Desk Mounting; Wall Mounting - ZyXEL Communications NBG7815 User Manual

The following table describes the items on the rear panel.
Table 5 Rear Panel Ports
LABEL
Power
USB
2.5G/1G
10G/Multi-Gig Connect Multi-Gigabit Ethernet devices to the Ethernet port for high speed Internet access.
LAN1 – LAN4
Reset

2.3 Desk Mounting

Place the side of the NBG7815 with the attached rubber feet carefully on the desk. These rubber feet
help protect the NBG7815 from shock or vibration and ensure space between the desk and NBG7815.
Cautions:
• Ensure enough clearance around the NBG7815 to allow air circulation for cooling.
• Do NOT remove the rubber feet except when wall mounting as it provides space for air circulation.

2.4 Wall Mounting

You may need screw anchors if mounting the NBG7815 on a concrete or brick wall.
Table 6 Wall Mounting Information
Distance between holes
M4 Screws
Screw anchors (optional)
Note: See The WiFi connection is slow or intermittent. on page 150
mounting location.
Figure 12 Screw Specifications
Select a position free of obstructions on a wall strong enough to hold the weight of the device.
1
Chapter 2 Hardware Installation and Connection
DESCRIPTION
Connect the power adapter to start the NBG7815.
The USB port is used for file-sharing and media server.
Connect an Ethernet cable to the Ethernet WAN port for Internet access.
Connect computers or other Ethernet devices to Ethernet ports for Internet access.
Press the button for longer than 8 seconds to return the NBG7815 to the factory defaults.
10.50 cm
Two
Two
NBG7815 User's Guide
22
when selecting the