Table of Contents
Advertisement
Table 65 VLAN Configuration: 802.1Q (continued)
LABEL
Modify
Load Template
Port List
Close
15.2.1 Configuring an 802.11Q VLAN
Ports are assigned membership in a VLAN by associating a VLAN ID with the ports.
In the VLAN Configuration screen, click New or Modify to display the setup screen.
Figure 91 VLAN Configuration: 802.1Q: New or Modify
Chapter 15 VLAN
NetAtlas Enterprise Ethernet Switch Manager User's Guide
DESCRIPTION
Click on a VLAN in the left-hand column of this screen. Change the VLAN ID, VLAN
Name or change the configuration of the egress, forbidden and untagged ports. Click
the Modify button to save the changes.
Use a VLAN template to overwrite existing selected VLANs. Select one or more
VLANs and click the Load Template button. See
information.
Click on a port in the Egress Ports list to add the selected port to the port list. If a
port is not selected from any of the three port lists, then it is a normal tagged port.
Refer to
Table 66 on page 137
Click Close to close the screen.
Section 6.2 on page 68
for the VLAN port type descriptions.
for more
136
Advertisement
Table of Contents
