Table of Contents
Advertisement
Figure 24 View: Port Status
The following table describes the labels in this screen.
Table 21 View: Port Status
LABEL
Port
Link Speed
State
LACP
PD
TxPkts
RxPkts
Errors
Polling
Close
Chapter 5 View
NetAtlas Enterprise Ethernet Switch Manager User's Guide
DESCRIPTION
This identifies the Ethernet port.
This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps or 1000M
for 1000Mbps).
This field displays the STP state of the port. See the Spanning Tree Protocol
chapter for details on STP port states.
This field displays whether LACP is activated.
This field displays the power device (PD) module status on the switch. If N/A is
displayed, the switch does not have a PD.
This field displays On if the switch has a PD and it is in use.
This field displays Off if the switch has a PD, but it is not in use.
This field shows the number of transmitted frames on this port.
This field shows the number of received frames on this port.
This field shows the number of received errors on this port.
The text box displays how often (in seconds) this screen refreshes. You may
change the refresh interval by typing a new number in the text box and then clicking
the Apply button.
Click Close to close the screen.
56
Advertisement
Table of Contents
