Table of Contents
Advertisement
This chapter shows you how to configure the routing functions using the IP Configuration
screens.
18.1 RIP
RIP (Routing Information Protocol allows a routing device to exchange routing information
with other routers.
1 In the Device Panel list, right-click on a device.
2 Click Configuration > IP Configuration > RIP.
Figure 116 IP Configuration: RIP
The following table describes the labels in this screen.
Table 85 IP Configuration: RIP
LABEL
Active
Index
Network
Chapter 18 IP Configuration
NetAtlas Enterprise Ethernet Switch Manager User's Guide
DESCRIPTION
Select this check box to enable RIP on the switch.
This field displays the index number of an IP interface.
This field displays the IP interface configured on the switch.
Refer to the section on IP Setup for more information on configuring IP domains.
C
H A P T E R
IP Configuration
1 8
164
Advertisement
Table of Contents
