Table of Contents
Advertisement
This appendix gives a brief overview of the SNMPc Network Manager.
Starting the SNMPc Network Manager
You must have SNMPc properly installed before you can use the EMS; please refer to the
Castle Rock web site at
You may start the SNMPc Network Manager manually or automatically each time you turn on
your computer.
Manual Startup
Click Start, Programs, SNMPc, Startup System to manually start the SNMPc network
manager. This is the default location of the SNMPc network manager.
Automatic Startup
To automatically start the SNMPc network manager each time you turn on your computer:
1 In SNMPc main window, click Config, System Startup.
2 Select the Auto Startup check box and click Done.
Figure 132 Automatic Startup
Appendix A
NetAtlas Enterprise Ethernet Switch Manager User's Guide
SNMPc Network Manager
www.castlerock.com
Appendix A
or see your SNMPc user's guide.
186
Advertisement
Table of Contents
