Device Firmware Versions Supported; Ems Installation; Accessing Netatlas; Figure 1 Snmpc: Switch Device List Icon - ZyXEL Communications NETATLAS ENTERPRISE User Manual

Ethernet switch manager
Hide thumbs Also See for NETATLAS ENTERPRISE:
Table of Contents

Advertisement

NetAtlas Enterprise Ethernet Switch Manager User's Guide
Table 1 System Requirements (continued)
HARDWARE
Screen Resolution: 1024x768 pixels
Ethernet Adaptor: 10/100 Mbps

1.2.1 Device Firmware Versions Supported

The EMS supports the devices and device firmware versions as listed in the following tale.

Table 2 Device Firmware Versions Supported

MODEL
ES-2108
ES-2108G
ES-2024A
GS-2024
ES-3124
ES-3124PWR
GS-4012F
GS-4024

1.3 EMS Installation

Refer to the Quick Start Guide for the EMS installation procedure.

1.4 Accessing NetAtlas

Follow the steps below to access NetAtlas.
1 In the SNMPc main screen, double-click the switch icon.

Figure 1 SNMPc: Switch Device List Icon

2 Click the Switch Manager icon to display the main EMS screen.
25
SOFTWARE
FIRMWARE VERSION
360ABK1C0 or later versions
360ABL1C0 or later versions
360TX1C0 or later versions
360LT0C0 or later versions
360TP1C0 or later versions
360TY1C0 or later versions
360TS2C0 or later versions
360LL2C0 or later versions
Chapter 1 Introduction

Advertisement

Table of Contents
loading

Table of Contents