Table of Contents
Advertisement
NetAtlas Enterprise Ethernet Switch Manager User's Guide
Figure 125 IP Configuration: DHCP: Relay
The following table describes the labels in this screen.
Table 95 IP Configuration: DHCP: Relay
LABEL
Active
Remote DHCP
Server 1 .. 3
Relay Agent
Information
Information
Apply
18.6 VRRP
Virtual Router Redundancy Protocol (VRRP), defined in RFC 2338, allows you to create
redundant backup gateways to ensure that the default gateway of a host is always available.
177
DESCRIPTION
Select this check box to enable DHCP relay.
Enter the IP address of a DHCP server in dotted decimal notation.
Select the Option 82 check box to have the switch add information (slot number, port
number and VLAN ID) to client DHCP requests that it relays to a DHCP server.
This read-only field displays the system name you configure in the System
Information screen (refer to
Select the check box for the switch to add the system name to the client DHCP
requests that it relays to a DHCP server.
Click Apply to save the changes.
Section 14.1 on page
120).
Chapter 18 IP Configuration
Advertisement
Table of Contents
