Chapter 1 Product Introduction
1.1 Outline
H-1/2/4SDI-QAM-IPLL
encoding (MPEG-2 HD/SD, MPEG-4/AVC H.264 HD/SD) and modulating to convert V/A signals into Digital RF
output. It is equipped with 4 HDMI (4 SDI optional) channels input and 1 ASI input(optional) and output via
2 ASI ports(optional) and 1 DATA (4*SPTS or 2 or 4 MPTS--as per carrier numbers) output over UDP,
RTP/RTSP. The latency has been greatly reduced to achieve an extremely low value from the encoding
progress to the decoding terminals.
It adopts an inner drawer-type structural design which greatly facilitates the change of encoding modules
(HDMI/SDI ) as needed. The signals source could be from satellite receivers, closed-circuit television
cameras, Blue-ray players, and antenna etc.
1.2 Main Features
4* HDMI/SDI inputs
MPEG2 & MPEG4 AVC/H.264 HD/SD video encoding
Up to 1920*1080@50P/60P (MPEG4 AVC/H.264)
Up to 1920*1080@50I/60I (MPEG2 HD)
Huge video buffer (for SDI interface)
MPEG1 Layer II, MPEG2-AAC, MPEG4-AAC, AC3 2.0 (Optional) audio encoding
1*ASI input for re-mux and ASI out—(Optional);
1*RF input for mix—(Optional)
Support CC (closed caption ) for SDI interface
DVB-C/DVB-T/ATSC/ISDB-T RF out for option
Support IP (4*SPTS or 4*MPTS) output over UDP, RTP/RTSP protocol---DVB-C/DVB-T/ATSC
Support IP (4*SPTS or 2*MPTS) output over UDP, RTP/RTSP protocol---ISDB-T
Extremely low latency
LCN support (Logical Channel Number)
Excellent modulation quality MER≥40dB
RF Frequency range 50Mhz~960Mhz
LCD display, Remote control and firmware
Web NMS management; Updates via web
Tel: (800) 521-8467
series products are Thors's new breakthrough all-in-one devices which integrate
Email:
sales@thorfiber.com
http://www.thorbroadcast.com
H-1/2/4SDI-QAM-IPLL
1
Need help?
Do you have a question about the H-1SDI-ATSC-IPLL and is the answer not in the manual?