Wan Ip And Dns Server Address Assignment - ZyXEL Communications NBG-417N - V1.0 Manual

Chapter 4 Connection Wizard

4.4.8 WAN IP and DNS Server Address Assignment

The following wizard screen allows you to assign a fixed WAN IP address and DNS
server addresses.
Figure 20 Wizard Step 3: WAN IP and DNS Server Addresses
The following table describes the labels in this screen
Table 16 Wizard Step 3: WAN IP and DNS Server Addresses
LABEL
WAN IP Address Assignment
My WAN IP Address
My WAN IP Subnet
Mask
Gateway IP Address
System DNS Server Address Assignment (if applicable)
DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. The DNS server is extremely important because without it, you
must know the IP address of a computer before you can access it. The NBG-417N uses a
system DNS server (in the order you specify here) to resolve domain names for DDNS and
the time server.
First DNS Server
Second DNS Server
Back
Next
Exit
50
DESCRIPTION
Enter your WAN IP address in this field. The WAN IP address
should be in the same subnet as your DSL/Cable modem or
router.
Enter the IP subnet mask in this field.
Enter the gateway IP address in this field.
Enter the DNS server's IP address in the fields provided.
If you do not configure a system DNS server, you must use IP
addresses when configuring DDNS and the time server.
Click Back to return to the previous screen.
Click Next to continue.
Click Exit to close the wizard screen without saving.
NBG-417N User's Guide