Ethernet Connection; Pppoe Connection - ZyXEL Communications NBG-417N - V1.0 Manual

Chapter 4 Connection Wizard
This wizard screen varies according to the connection type that you select.
Figure 15 Wizard Step 3: ISP Parameters.
The following table describes the labels in this screen,
Table 11 Wizard Step 3: ISP Parameters
CONNECTION
TYPE
Ethernet
PPPoE
PPTP

4.4.1 Ethernet Connection

Choose Ethernet when the WAN port is used as a regular Ethernet. Continue to
Section 4.4.4 on page
Figure 16 Wizard Step 3: Ethernet Connection

4.4.2 PPPoE Connection

Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection.
PPPoE is an IETF (Internet Engineering Task Force) standard specifying how a host
44
DESCRIPTION
Select the Ethernet option when the WAN port is used as a regular
Ethernet.
Select the PPP over Ethernet option for a dial-up connection. If
your ISP gave you an IP address and/or subnet mask, then select
PPTP.
Select the PPTP option for a dial-up connection.
47.
NBG-417N User's Guide