17.4 WWW Screen
To change your NBG-417N's World Wide Web settings, click Management >
Remote MGMT to display the WWW screen.
Figure 84 Management > Remote MGMT > WWW
The following table describes the labels in this screen
Table 56
LABEL
Server Port
Server Access
Secured Client
IP Address
Apply
Reset
NBG-417N User's Guide
Management > Remote MGMT > WWW
DESCRIPTION
You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
Select the interface(s) through which a computer may access the NBG-
417N using this service.
A secured client is a "trusted" computer that is allowed to communicate
with the NBG-417N using this service.
Select All to allow any computer to access the NBG-417N using this
service.
Choose Selected to just allow the computer with the IP address that
you specify to access the NBG-417N using this service.
Note: This only applies on WAN IP.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Chapter 17 Remote Management
161