Wan Ip And Dns Server Address Assignment; Figure 38 Wizard Step 3: Wan Ip And Dns Server Addresses; Table 18 Wizard Step 3: Wan Ip And Dns Server Addresses - ZyXEL Communications NBG318S User Manual

Chapter 4 Connection Wizard
2 If the ISP did not give you DNS server information, leave the DNS Server fields set to
0.0.0.0 in the Wizard screen and/or set to From ISP in the WAN > Internet
Connection screen for the ISP to dynamically assign the DNS server IP addresses.

4.4.8 WAN IP and DNS Server Address Assignment

The following wizard screen allows you to assign a fixed WAN IP address and DNS server
addresses.

Figure 38 Wizard Step 3: WAN IP and DNS Server Addresses

The following table describes the labels in this screen

Table 18 Wizard Step 3: WAN IP and DNS Server Addresses

LABEL
WAN IP Address Assignment
My WAN IP Address
My WAN IP Subnet Mask
Gateway IP Address
System DNS Server Address Assignment (if applicable)
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice
versa. The DNS server is extremely important because without it, you must know the IP address of a
computer before you can access it. The NBG318S uses a system DNS server (in the order you specify
here) to resolve domain names for DDNS and the time server.
First DNS Server
Second DNS Server
Third DNS Server
Back
Next
Exit
66
DESCRIPTION
Enter your WAN IP address in this field. The WAN IP address should be in
the same subnet as your DSL/Cable modem or router.
Enter the IP subnet mask in this field.
Enter the gateway IP address in this field.
Enter the DNS server's IP address in the fields provided.
If you do not configure a system DNS server, you must use IP addresses
when configuring DDNS and the time server.
Click Back to return to the previous screen.
Click Next to continue.
Click Exit to close the wizard screen without saving.
NBG318S User's Guide