Table 36 Network > WAN > Internet Connection: PPTP Encapsulation
LABEL
Clone the
computer's MAC
address - IP
Address
Set WAN MAC
Address
Apply
Reset
8.5 Advanced WAN Screen
Use this screen to enable Multicast, allow Windows Networking and enable
Auto-bridge.
Note: The three categories shown in this screen are independent of each other.
To change your NBG-417N's advanced WAN settings, click Network > WAN >
Advanced. The screen appears as shown.
Figure 59 Network > WAN > Advanced
NBG-417N User's Guide
DESCRIPTION
Select Clone the computer's MAC address - IP Address and
enter the IP address of the computer on the LAN whose MAC you
are cloning. Once it is successfully configured, the address will be
copied to the rom file. It will not change unless you change the
setting or upload a different ROM file.
Select this option and enter the MAC address you want to use.
Click Apply to save your changes back to the NBG-417N.
Click Reset to begin configuring this screen afresh.
Chapter 8 WAN
105