Congatec conga-HPC/uATX-Server User Manual page 15

3.4 Environmental Specifications
Temperature (commercial):
Temperature (industrial):
Relative Humidity:
Note
1. The above operating temperatures must be strictly adhered to at all times. The maximum operating temperature refers to any measurable
spot on the modules surface.
2. Humidity specifications are for non-condensing conditions.
3.5 Storage Specifications
This section describes the storage conditions that must be observed for optimal performance of congatec products.
3.5.1 The conga-HPC/uATX-Server
For long term storage of the conga-HPC/uATX-Server (more than six months), keep the conga-HPC/uATX-Server in a climate-controlled
building at a constant temperature between 5°C and 40°C, with humidity of less than 65% and at an altitude of less than 3000 m. Also ensure
the storage location is dry and well ventilated.
Note
We do not recommend storing the conga-HPC/uATX-Server for more than five years under these conditions.
3.5.2 Cooling Solution
The heatpipes of congatec heatspreaders/cooling solutions are filled with water by default. For optimal cooling performance, do not store the
heatspreaders/cooling solutions at temperatures below -20°C.
Caution
1. For temperatures between -10°C and -20°C, preheat the heatpipes before operation. Optionally, fill the heatpipes with acetone.
2. For optimal thermal dissipation, do not store the congatec cooling solutions for more than six months.
Copyright © 2024 congatec GmbH
Operation: 0°C to 60°C
Operation: -40°C to 85°C
Operation: 10% to 90%
Storage: -20° to +70°C
Storage: -40° to +85°C
Storage: 5% to 95%
HATXm001 15/51