Download  Print this page

Saving Paper Default Settings - Dell All-in-One Wireless Printer P513w User Manual

Dell personal all-in-one printer user's guide.
Hide thumbs

Advertisement

Table of Contents
Load up to:
10 iron-on transfers
50 transparencies

Saving paper default settings

You can set the default paper size, paper type, and photo print size for the documents and photos that you print.
Note: These default settings apply only to print, copy, and scan jobs that you initiate from the printer.
1
From the printer control panel, press
2
Choose the default settings:
If you want to set the default paper size:
a
Press
to select Paper Setup.
b
Press the up or down arrow button to scroll to Paper Size, and then press
c
Press the up or down arrow button to select the default paper size for the printer, and then press
If you want to set the default paper type:
a
Press
to select Paper Setup.
b
Press the up or down arrow button to scroll to Paper Type, and then press
c
Press the up or down arrow button to select the default paper type for the printer, and then press
If you want to set the default photo print size:
a
Press the up or down arrow button to scroll to Defaults, and then press
b
Press
to select Photo Print Size.
c
Press the up or down arrow button to select the default photo print size for the printer, and then press
.
3
Press
until you exit Setup, or press another mode button.
Make sure that:
.
Loading paper and original documents
28
You follow the loading instructions on the iron-on
transfer packaging.
The print side of the transfer is faceup.
The paper guides rest against the edges of the transfer.
You select Automatic, Normal, or Photo print quality.
The rough side of the transparencies is faceup.
The paper guides rest against the edges of the
transparencies.
.
.
.
.
.

Advertisement

Table of Contents

   Also See for Dell All-in-One Wireless Printer P513w

   Related Manuals for Dell All-in-One Wireless Printer P513w

This manual is also suitable for:

P513w all in one photo printer

Comments to this Manuals

Symbols: 0
Latest comments: