4
Press the up or down arrow button to scroll to Use Factory, and then press
5
When prompted to set the initial settings of your printer, make your selections using the printer control panel
buttons.
Initial Setup Complete appears on the display.
Using a button combination (if you cannot read the current
language)
1
Turn off the printer.
Note: If you have set the Power Saver timeout in the Setup menu, then press and hold
turn off the printer.
2
From the printer control panel, press and hold
Note: Do not release
has been reset.
3
When prompted to set the initial settings of your printer, make your selections using the printer control panel
buttons.
Initial Setup Complete appears on the display.
and
until Language Selection appears on the display, indicating that the printer
Using the printer control panel buttons and menus
and
, and then press and release
18
.
for three seconds to
to turn the printer on.