NSD ABSOCODER NCW-3DHIPLC Specifications & Instruction Manual page 10

1-1. Features
(1) Superior durability
ABSOCODER sensor is not used electronic parts except coils and resistance, and it features a no-contact
construction excepting bearing. This sensor offers problem-free operation, even in environment where it is
exposed to vibration, impact shocks, extreme temperatures, oil, and dust.
(2) Compact design
The unit's outside dimensions (39(W) x 155(H) x 93(D)) were miniaturized. DIN rail can be used, so mounting is
much easier.
(3) EtherNet/IP communication
A position, preset, alarm, and parameter data can be transmitted through the EtherNet/IP network.
- The converter supports full duplex (100BASE-TX), so data can be transmitted faster.
- The minimum cycle for communication is 2ms.
(4) Two axes ABSOCODER sensor can connect
The machine positions for two axes can be detected by one converter. The space-saving in the control panel can
be conducted.
(5) Diagnosis function
The error information can be expressed both by EtherNet/IP alarm data and by monitor LEDs on the converter's
front panel.
(6) Preset function
The position data can be preset to the desired value from the EtherNet/IP master.
(7) Configuration tool (software for configurating the system)
Settings are available by using EtherNet/IP software.
(8) Supporting the device level ring function (DLR)
NCW-3DHIP can connect to the network by ring topology (redundancy) of EtherNet/IP network.
(9) Applicable with JKPEV-S cable
A commercially available cable (JKPEV-S 1.25mm
sensor.
(10) Compliance with CE standards
The converter complies with CE (EMC Directive) standards.
x 5P) can be used between the converter and ABSOCODER
2
2