ADF Web HD67677-IP-A1 User Manual page 12

Industrial Electronic Devices
HD67677-MSTP-A1
The device has four LEDs that are used to give information of the functioning status.
The various meanings of the LEDs are described in the table below.
LED
1: Device State
2: Link Ethernet
3: BACnet communication
4: CAN Communication
ADFweb.com S.r.l.
Normal Mode
Blinks slowly (~1Hz)
ON: Ethernet cable connected
OFF: Ethernet cable disconnected
Blinks quickly when receive a BACnet request
Blinks quickly when receive CAN frames defined in the
section "Receive Frames" of Compositor
User Manual BACnet slave / CAN
Document code: MN67677_ENG Revision 1.010
Boot Mode
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
ON: Ethernet cable connected
OFF: Ethernet cable disconnected
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Page 12 of 34