Universal Robots 3PE Teach Pendant Installation Manual page 8

NOTICE
Failure to install the Teach Pendant with 3-Position Enabling Device properly can result in
damage to equipment or property.
• The 3PE Teach Pendant must be installed properly in order to meet regulatory
requirements.
3.1. Use of Product
The Teach Pendant with 3-Position Enabling Device is only certified for use with Universal Robots e-
Series control boxes.
3.2. Components
The Teach Pendant with 3-Position Enabling Device consists of the following components:
• 3PE Teach Pendant with attached Teach Pendant cable
3.3. Requirements
The robot system software, using the 3PE Teach Pendant must be newer than V5.8.0
NOTICE
Installing an Teach Pendant with 3-Position Enabling Device in a robot system using
software version older than V5.8.0 can result in damage to equipment or property.
• Verify your software system number before installing the Teach Pendant with 3-
Position Enabling Device.
Teach Pendant with 3-Position
Enabling Device
Installation Guide