ADF Web HD67251-A1 User Manual page 9

Industrial Electronic Devices
NEW PROJECT / OPEN PROJECT:
The "New Project" button creates the folder which contains the entire device configuration.
A device configuration can also be imported and exported:
To clone the configurations of a Programmable DeviceNet to NMEA 2000 Converter in order to configure another device in the same
manner, it is necessary to maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to duplicate the project folder with another name
and open the new folder with the button "Open Project".
When a new project is created or an existent project is open, it will be possible to access the various configuration sections of the software:
"Set Communication";
o
"Receive Frames";
o
"Send Frame".
o
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual NMEA 2000 / DeviceNet
Document code: MN67251_ENG Revision 1.001
INFO: www.adfweb.com Phone +39.0438.30.91.31
Page 9 of 18