ADF Web HD67225-A1 User Manual

Nmea2000/modbus tcp slave

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Industrial Electronic Devices

User Manual

Revision 1.100

English

NMEA 2000 / Modbus TCP Slave

- Converter

(Order Code: HD67225-A1, HD67225-B2)

for Website information:

www.adfweb.com?Product=HD67225-A1

www.adfweb.com?Product=HD67225-B2

for Price information:

www.adfweb.com?Price=HD67225-A1

www.adfweb.com?Price=HD67225-B2

Benefits and Main Features:

Very easy to configure

Low cost

32mm Rail DIN mount

Wide supply input range

Temperature range: -40°C/+85°C (-40°F/+185°F)

User Manual

ADFweb.com Srl – IT31010 – Mareno – Treviso

User Manual NMEA2000 / Modbus TCP Slave

Document code: MN67225_ENG

Revision 1.100

For others Gateways / Bridges:

NMEA2000 to Modbus

Need help?

Do you have a question about the HD67225-A1 and is the answer not in the manual?

Questions and answers

Summary of Contents for ADF Web HD67225-A1

Page 1 Page 1 of 30 Industrial Electronic Devices User Manual Revision 1.100 English NMEA 2000 / Modbus TCP Slave - Converter (Order Code: HD67225-A1, HD67225-B2) For others Gateways / Bridges: for Website information: NMEA2000 to Modbus www.adfweb.com?Product=HD67225-A1 See also the following links: www.adfweb.com?Product=HD67225-B2 www.adfweb.com?Product=HD67222...
Page 2: Table Of Contents
User Manual NMEA2000 / Modbus TCP Slave Document code: MN67225_ENG Revision 1.100 Page 2 of 30 Industrial Electronic Devices INDEX: UPDATED DOCUMENTATION: Dear customer, we thank you for your attention and we remind you that you need to check that the following document is: Page INDEX Updated...
Page 3: Security Alert
User Manual NMEA2000 / Modbus TCP Slave Document code: MN67225_ENG Revision 1.100 Page 3 of 30 Industrial Electronic Devices SECURITY ALERT: ENERAL NFORMATION To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device are required for each individual application, legal and safety regulation.
Page 4: Example Of Connection
User Manual NMEA2000 / Modbus TCP Slave Document code: MN67225_ENG Revision 1.100 Page 4 of 30 Industrial Electronic Devices EXAMPLES OF CONNECTION: ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31...
Page 5: Connection Scheme
User Manual NMEA2000 / Modbus TCP Slave Document code: MN67225_ENG Revision 1.100 Page 5 of 30 Industrial Electronic Devices CONNECTION SCHEME: Figure 1a: Connection scheme for HD67225-A1 ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31...
Page 6 User Manual NMEA2000 / Modbus TCP Slave Document code: MN67225_ENG Revision 1.100 Page 6 of 30 Industrial Electronic Devices Figure 1b: Connection scheme for HD67225-B2 ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31...
Page 7: Characteristics
User Manual NMEA2000 / Modbus TCP Slave Document code: MN67225_ENG Revision 1.100 Page 7 of 30 Industrial Electronic Devices CHARACTERISTICS: The “NMEA 2000 / Modbus TCP Slave – Converter” allows the following characteristics: two-directional information between networks NMEA 2000 and Modbus; electrical isolation between two Buses;...
Page 8: Power Supply
The devices can be powered at 8…24V AC and 12…35V DC. For more details see the two tables below. Vmin Vmax Vmin Vmax Consumption at 24V DC: Device Consumption [W/VA] HD67225-A1 HD67225-B2 Caution: Not reverse the polarity power HD67225-A1 HD67225-B2 ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com...
Page 9: Function Modes
User Manual NMEA2000 / Modbus TCP Slave Document code: MN67225_ENG Revision 1.100 Page 9 of 30 Industrial Electronic Devices FUNCTION MODES: The device has got two function modes depending on the position of the ‘Dip2 of Dip-Switch A’: The first, with ‘Dip2 of Dip-Switch A’ at “OFF” position, is used for the normal working of the device. The second, with ‘Dip2 of Dip-Switch A’...
Page 10: Leds
User Manual NMEA2000 / Modbus TCP Slave Document code: MN67225_ENG Revision 1.100 Page 10 of 30 Industrial Electronic Devices LEDS: The devices has got four (five for HD67225-B2) LEDs that are used to give information of the functioning status. The various meanings of the LEDs are described in the table below. Normal Mode Boot Mode Blinks quickly: Boot state...
Page 11: Ethernet
ETHERNET: The Ethernet connection must be made using Connector5 of HD67225-A1/HD67225-B2 with at least a Category 5E cable. The maximum length of the cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To connect the device to a Hub/Switch the use of a straight cable is recommended.
Page 12: Nmea 2000
User Manual NMEA2000 / Modbus TCP Slave Document code: MN67225_ENG Revision 1.100 Page 12 of 30 Industrial Electronic Devices NMEA 2000: For terminating the NMEA 2000 line with a 120Ω resistor it is necessary that the Dip1 of ‘Dip-Switch C’ is at ON position. Cable characteristics: DC parameter: Impedance...
Page 13: Use Of Compositor Sw67225
User Manual NMEA2000 / Modbus TCP Slave Document code: MN67225_ENG Revision 1.100 Page 13 of 30 Industrial Electronic Devices USE OF COMPOSITOR SW67225: To configure the Converter, use the available software that runs with Windows called SW67225. It is downloadable on the site www.adfweb.com and its operation is described in this document.
Page 14: New Project / Open Project
User Manual NMEA2000 / Modbus TCP Slave Document code: MN67225_ENG Revision 1.100 Page 14 of 30 Industrial Electronic Devices NEW CONFIGURATION / OPEN CONFIGURATION: “New Configuration” button creates the folder which contains the entire device’s configuration. A device’s configuration can also be imported or exported: To clone the configurations of a programmable “NMEA 2000 / Modbus TCP Slave - Converter”...
Page 15: Software Options
User Manual NMEA2000 / Modbus TCP Slave Document code: MN67225_ENG Revision 1.100 Page 15 of 30 Industrial Electronic Devices SOFTWARE OPTIONS: By pressing the “Settings” ( ) button there is the possibility to change the language of the software and check the updatings for the compositor.
Page 16: Set Communication
User Manual NMEA2000 / Modbus TCP Slave Document code: MN67225_ENG Revision 1.100 Page 16 of 30 Industrial Electronic Devices SET COMMUNICATION: This section defines the fundamental communication parameters of two Buses, NMEA 2000 and Modbus TCP. By pressing the “Set Communication”...
Page 17 User Manual NMEA2000 / Modbus TCP Slave Document code: MN67225_ENG Revision 1.100 Page 17 of 30 Industrial Electronic Devices If the field “Filter FECA (ms)” is checked when the FECA PGN arrives the gateway puts the values in Standby. If the time, expressed in milliseconds and written at the right side of “Filter FECA”, is elapsed and there aren’t arrived the frames of Transport Protocol the gateway put the data of FECA into Modbus Registers.
Page 18: Receive Nmea 2000
User Manual NMEA2000 / Modbus TCP Slave Document code: MN67225_ENG Revision 1.100 Page 18 of 30 Industrial Electronic Devices RECEIVE NMEA 2000: By pressing the “Receive NMEA 2000” button from the main window for SW67225 (Fig. 2) the window “Receive CAN Frames Definition” appears (Fig.
Page 19 User Manual NMEA2000 / Modbus TCP Slave Document code: MN67225_ENG Revision 1.100 Page 19 of 30 Industrial Electronic Devices If “Device from May 2014 (with Dip-Switches)” is set in the section “Set Communication”, the window appears like below: Figure 4b: “Receive NMEA 2000 Frames” window In the field “PGN”...
Page 20: Define Receive Nmea 2000
User Manual NMEA2000 / Modbus TCP Slave Document code: MN67225_ENG Revision 1.100 Page 20 of 30 Industrial Electronic Devices DEFINE NMEA 2000: By pressing the “Define COB” button near “Receive NMEA 2000” from the main window for SW67225 (Fig. 2) the window “Define Modbus Registers for Receive NMEA 2000 Frames”...

This manual is also suitable for:

Hd67225-b2