Wren Kitchens Base Unit 972 Corner Base Fittings Manual page 8

Fixing the hinges to the frontals
Insert the hinges into the top and bottom
holes on the frontal.
Secure the hinges by tightening 2x screws
with the hinge dowels attached. These are
already positioned within the hinges.
Connecting the corner post
Align the corner post to the frontal. Equally
space 2x fixing plates to the back of the
frontal and the corner post. Ensure a 3mm
gap is maintained between the frontal and
the post once fixed together.
Screw in place using 4x15mm screws per
fixing plate.
If one of the frontals has a handle and the other will have the corner post attached.
Attaching the frontal
The frontal should be attached to the unit by
clipping the hinges onto the hinge plates.
The bar of the hinge needs to be positioned
into the hooks on the hinge plate. Then the
rear of the hinge pushed to the hinge plate
until it clicks.
Adding the door buffers
Position 2x door buffer at the top and bottom
corners of the carcase, as illustrated in the
image.
Page 8