Wren Kitchens Base Unit 972 Corner Base Fittings Manual page 6

Before attaching the units together, ensure that the milano profie cutout of both units align.
Securing to adjacent units
Clamp together the two units, checking the
front edges are level and flush.
Using the screws provided, 1x30mm screw
should be fixed into each corner of the
carcase side.
The screws can be concealed by placing
them behind the shelf or behind the hinge
plates. The cover caps can be used to hide
any visible screw heads that remain.
Attaching the fixing plates to the shelf
Position the shelf pegs into the pre-drilled
holes inside the unit.
Add the 2x fixing plates to the bottom of the
large shelf, fix each of the fixing plates with
2x15mm screws. Ensuring the fixing plates are
evenly spaced.
Lifting the shelf into position (Large shelf)
Then lift the large shelf into position on the
shelf pegs inside the unit, ensuring the fixing
plates are at the bottom. Make sure the shelf
touches the back panel.
Page 6