Wren Kitchens Base Unit 972 Corner Base Fittings Manual page 2

Remember to take care when unpacking. Please keep your workspace clean, clear
and tidy when working. This will help keep all items safe from any damages. Any
un-needed cardboard or plastic should be flattened down and placed in the bin.
Removing the unit, frontals, fixtures and
fittings
The small unit of the L-shape corner unit will
be packaged inside the large unit, take care
when removing.
Remove all content so the unit is empty.
All fixtures and fittings should be kept on
a clean and level surface and grouped by
product.
Attaching the base panels together
Place the units on a level surface, make sure
the bottom panels are facing up. Use the
diagram for reference.
Using 2 fixing plates, each with 4x15mm
screws, fasten the base panels of the unit
together. Make sure the plates are evenly
spaced between the pre-drilled holes for the
leg bases.
Attaching the top rail and top of unit
together
Fix the top rail from the large unit and the
top of the small unit together, using 2 fixing
plates, each with 4x15mm screws, ensuring
the plates are evenly spaced.
Attaching the units together
Install 2 connecting plates across both units,
each with 4x15mm screws, to join the back of
the small unit and the side of the large unit,
ensuring that the fixing plates are separated
equally.
Unit is
upside
down
Unit is
upside
down
Unit is
upside
down
Page 2