Related Manuals for Wren Kitchens TOWER UNIT 600 2 Door Fridge/Freezer Series
Summary of Contents for Wren Kitchens TOWER UNIT 600 2 Door Fridge/Freezer Series
- Page 1 TOWER UNIT 600 2 Door Fridge/Freezer Assembly Guide 2070 x 600 2070 x 600 50/50 70/30 2250 x 600 Tall 2250 x 600 Tall 50/50 70/30 For Internal Use: FI.WR.INS.041 | WKIN00141_TOWER_600_2DrFridgeFreezer_Rev2.psd...
- Page 2 TOWER UNIT 600 2 Door BEFORE YOU START Fridge/Freezer INSTALLATION SHOULD BE Assembly Guide PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED 70/30 OPTION 50/50 OPTION Panel B Panel C Panel E Legs Frontal (packed separately) Appliance Shelf x2 End Panel x2 Base Panel...
- Page 3 TOWER UNIT Step 1. 600 2 Door Dowel (F) Fridge/Freezer Seat dowel (F) into holes in both end panels (B) as shown. Assembly Guide Step 2. Cam dowel (G) Seat cam dowel (G) into holes in both end panels (B) Seat (G) as shown.
- Page 4 TOWER UNIT Step 5. 600 2 Door Secure each of the legs into Fridge/Freezer place with 2 x 15mm Screws (L). Assembly Guide FRONT FRONT FRONT LEG POSITON DIAGRAM Ensure legs are rotated as shown so that part of it is supporting the end panels (B).
- Page 5 TOWER UNIT 600 2 Door Fridge/Freezer 2070 Assembly Guide Hinge mounting plate Attach hinge plates onto end panels (B) In locations shown using 8 x 15mm screws (L) hinge side to be mounted in accordance to customer kitchen plan. N.B. L Bracket For appliance shelf, secure to panel (B) using 4 x brackets (W) locate according to customer appliance requirements.
- Page 6 TOWER UNIT 600 2 Door Fridge/Freezer 2250 Hinge mounting plate Assembly Guide Attach hinge plates onto end panels (B) In locations shown using 8 x 15mm screws (L) Hinge side to be mounted in accordance to customer kitchen plan. N.B. L Bracket For appliance shelf, secure to panel (B) using 4 x brackets (W) locate according to customer appliance requirements.
- Page 7 TOWER UNIT 600 2 Door Fridge/Freezer Assembly Guide Secure tower to the wall using the L brackets use 2 x 15mm screws (L) to secure each of the L brackets to the cabinets at either side. Then screw through into the wall as shown. Screws for fixing to walls are not provided as these vary depending on your wall material and construction.
- Page 8 TOWER UNIT FOR TOWER FRONTALS 600 2 Door SEE CUSTOMER SPECIFIC Fridge/Freezer KITCHEN PLAN Assembly Guide Step 8 Insert hinge in top & bottom frontal holes as shown. Step 9 Secure hinges by tightening 2 x screws with plastic grommet attached. These are already positioned within the hinges.