Subscribe to Our Youtube Channel
Related Manuals for Wren Kitchens Vogue BASE UNIT 972 L Corner
Summary of Contents for Wren Kitchens Vogue BASE UNIT 972 L Corner
- Page 1 BASE UNIT 972 L Corner Assembly Guide For Internal Use: FI.WR.INS.024_WKIN00106_BASE_972_LCnr_Rev6.indd...
- Page 2 BASE UNIT 972 L Corner Assembly Guide BEFORE YOU START INSTALLATION SHOULD BE PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED Legs Frontal Corner Post Panel A Panel C Panel B Panel S Panel T Panel E Loose Shelf x2 (Packed...
- Page 3 Step 1. Step 2. Seat dowel (F) Seat cam dowel (G) into into holes in holes in both end panels (B) Seat (G) cam dowel both end panels (B) as shown. into hole as as shown. shown. CARCASE 1 Dowel (F) &...
- Page 4 BASE UNIT 972 L Corner Assembly Guide Step 5. Slide back panel (A) into groove of panels (B). Once back panel (A) is in position, ensure the panel is flush & square with the bottom of the end panels (B) Step 6.
- Page 5 Step 8. Step 9. Seat dowel (F) Seat cam dowel (G) into into holes in holes in both end panels (B) Seat (G) Cam Dowel both end panels (B) as shown. into hole as as shown. shown. CARCASE 2 Dowel (F) &...
- Page 6 BASE UNIT 972 L Corner Assembly Guide Step 12. Secure panel (S) with 4x 45mm screws (P) at the top and 4x 45mm screws (P) in the bottom, in the holes provided as shown. Step 13. Secure both carcases together using fixing plates (U) with 4 x 15mm screws (L) to each plate (U).
- Page 7 Step 14. Position legs as shown. Ensure legs are rotated to also provide support to the end panels (B). Front Front Leg position diagram Step 15. Secure each of the legs into place with 4 x 15mm screws (L) per leg. Step 16.
- Page 8 BASE UNIT 972 L Corner Assembly Guide Step 17. Attach hinge mounting plate onto both end panels (B) as shown, using screws which are already positioned within the hinge plates. from top Hinge side or sides to be mounted in accordance to 94mm Customer Specific Kitchen Plan.
- Page 9 Step 18. Insert hinge in top & bottom holes as shown below. Step 19. Align corner post to frontal. Equally space 2 fixing plates (U) to the back of frontal & corner post. Ensure a 4mm gap is maintained between frontal & post once fixed together. Screw in place using 4 x 15mm screws (L) per fixing plate (U).
- Page 10 BASE UNIT 972 L Corner Assembly Guide Page 9...
- Page 11 For Internal Use: FI.WR.INS.024_WKIN00106_BASE_972_LCnr_Rev6.indd Page 10...
Need help?
Do you have a question about the Vogue BASE UNIT 972 L Corner and is the answer not in the manual?
Questions and answers