Wren Kitchens Base Unit 972 Corner Base Fittings Manual page 3

Inserting the leg bases
Locate the leg brackets and position, as
shown in the diagram. Ensure the leg
brackets are rotated so the flange covers the
outer edge, as this provides support for the
edge of the unit.
Pay extra attention to the leg bases
highlighted. The flange of these leg bases
must be positioned over the large unit, this is
to provide support to the unit.
Fixing the leg bases
Secure each of the leg brackets into place
with 4x15mm screws per bracket.
Inserting the legs
Push each leg firmly down into the leg
bracket. Adjusting each leg to 165mm.
Adjust the legs to the correct height by
turning clockwise or anti-clockwise.
Page 3