Roland XV-5050 Owner's Manual page 84

Chapter 4 Using the XV-5050 Effects
35: CHORUS -> DELAY
fig.02-035m
Balance D
L in
Balance W
Chorus
Balance W
R in
Balance D
Parameter Value
Cho Rate 0.05-10.00 Hz
Cho Depth 0-127
Cho Delay 0.0-100.0 ms
Cho Balance # D100:0W-
D0:100W
Delay Time 0.0-500.0 ms
Dly Feedback -98-+98 %
Dly HF Damp 200-8000 Hz,
BYPASS
Dly Balance # D100:0W-
D0:100W
Level 0-127
36: FLG -> DELAY
fig.02-036m
Balance D
L in
Feedback
Balance W
Flanger
Balance W
R in
Balance D
Parameter Value
Flg Rate 0.05-10.00 Hz
Flg Depth 0-127
Flg Feedback -98-+98 %
Flg Delay 0.0-100.0 ms
Flg Balance # D100:0W-
D0:100W
Delay Time 0.0-500.0 ms
Dly Feedback -98-+98 %
Dly HF Damp 200-8000 Hz,
BYPASS
Dly Balance # D100:0W-
D0:100W
Level 0-127
84
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Frequency of modulation
Depth of modulation
Adjusts the time until the cho-
rus is heard.
Volume balance between the
direct sound (D) and the cho-
rus sound (W)
Adjusts the time until the delay
is heard.
Adjusts the amount of the de-
lay sound that's fed back into
the effect. Negative (-) settings
invert the phase.
Adjusts the frequency above
which sound fed back to the ef-
fect is filtered out. If you do not
want to filter out any the high
frequencies, set this parameter
to BYPASS.
Adjusts the volume balance be-
tween the sound sent through
the delay (W) and the sound
that's not sent through the de-
lay (D).
Output level
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Frequency of modulation
Depth of modulation
Adjusts the amount of the flanger
sound that's fed back into the ef-
fect. Negative (-) settings invert the
phase.
Adjusts the time until the flanger is
heard.
Volume balance between the direct
sound (D) and the flanger sound
(W)
Adjusts the time until the delay
sound is heard.
Adjusts the amount of the delay
sound that's fed back into the ef-
fect. Negative (-) settings invert the
phase.
Adjusts the frequency above
which sound fed back to the effect
is filtered out. If you do not want to
filter out any high frequencies, set
this parameter to BYPASS.
Adjusts the volume balance be-
tween the sound sent through the
delay (W) and the sound that's not
sent through the delay (D).
Output level
37: CHO -> FLANGER
fig.02-037m
Balance D
L in
Balance W
Chorus
Balance W
R in
Balance D
Parameter Value
Cho Delay 0.0-100.0 ms
Cho Rate 0.05-10.00 Hz
Cho Depth 0-127
Cho Balance # D100:0W-
D0:100W
Flg Rate 0.05-10.00 Hz
Flg Depth 0-127
Flg Feedback -98-+98 %
Flg Delay 0.0-100.0 ms
Flg Balance # D100:0W-
D0:100W
Level 0-127
38: CHORUS/DELAY
The parameters are the same as for "35: CHORUS -> DELAY."
However, the Delay Balance parameter adjusts the volume balance
between the direct sound and the delay sound.
fig.02-038m
Balance D
L in
Chorus
Feedback
Delay
R in
Balance D
39: FLG/DELAY
The parameters are the same as for "36: FLG -> DELAY." However,
the Delay Balance parameter adjusts the volume balance between the
direct sound and the delay sound.
fig.02-039m
Balance D
L in
Flanger
Feedback
Feedback
Delay
R in
Balance D
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
Description
Adjusts the time until the chorus is
heard.
Modulation frequency of the chorus
effect
Modulation depth of the chorus effect
Volume balance between the direct
sound (D) and the chorus sound (W)
Modulation frequency of the flanger
effect
Modulation depth of the flanger effect
Adjusts the amount of the flanger
sound that's fed back into the effect.
Negative (-) settings invert the phase.
Adjusts the time until the flanger
sound is heard.
Adjusts the volume balance between
the sound sent through the flanger (W)
and the sound that's not sent through
the flanger (D).
Output level
L out
Balance W
Balance W
R out
L out
Balance W
Balance W
R out